HomeAbout usContact usView Cart

Carbon fiber sheet
Carbon fiber cloth
Carbon fiber tape
Carbon fiber tow
Aramid tow
Carbon fiber tubes
Carbon fiber rods
Carbon fiber strip & bar
Epoxy systems
Epoxy fillers
How to use...

West 206 Epoxy slow hardener - 800ml

West 206 Epoxy slow hardener - 800ml




206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working and cure time is needed or to provide adequate working time at higher temperatures. At 22-degrees C, 206 Slow Hardener will have a 20-25 minute Pot Life.

When combined with 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties.

To complete this product you will require 105 epoxy resin - 4 litre


Mix Ratio, Resin:Hardener 5:1 by weight or volume
Pot life at 22 C (72 F) 20 to 25 minutes
Cure to a solid state 9 to 12 hours
Cure to maximum strength 1 to 4 days
Minimum recommended temperature 16 C (60 F)
Pumps (optional) 300, 306-25 or 309

Hardner selection chart



Privacy policy I Warranty I Shipping I Contact us I Copyright © Carbon Fiber Australia