HomeAbout usContact usView Cart


Carbon fiber sheet
Carbon fiber cloth
Carbon fiber tape
Carbon fiber tow
Aramid tow
Carbon fiber tubes
Carbon fiber rods
Carbon fiber strip & bar
Epoxy systems
Epoxy fillers
How to use...

 

 

 

 

 

 

.
.

Credit card, direct debit and PayPal acceptedPaypal, credit card, direct deposit

For phone sales and inquiries please phone: 03 90019093

.

.
   
.



Carbon fiber unidirectional tape - 65mm wide x 50m long

Carbon fiber unidirectional tape - 65mm wide x 50m long



QTY:

Price:



 

Carbon fiber unidirectional cloth tape - 65mm wide x 50m long
 
Unidirectional carbon fiber (CF) tapes are good for areas requiring carbon strength in only one direction, or it can be overlapped with itself to achieve bidirectional strength.
 
Carbon tapes are ideal for those smaller jobs like tube winding, lap joining, making CF angle and repairing cracks in composite surfaces. CF tapes are woven in a method to prevent fraying on the edges, the tow is looped back to ensure that that the tape holds in place at all times.
 
Specifications
Weave
Unidirectional
Warp
3K
Width
65mm
Length
50m
Weight
200g/m
Thickness
0.20mm
 
How much epoxy resin will I need?
To completely wet out 1m (1m x 1m) of carbon fiber cloth you will require about 230 to 270g (230-270ml) of mixed epoxy resin. E.g. If you were to make a carbon fiber sheet 1m with a thickness of 1mm to 1.25mm you would use three layers of 200g carbon fiber and a total of 690 to 810g of resin. Please note this is only a rough guide and the volume of resin used is totally dependant on the techniques used (vacuum bagging, wet lay-up, press set, etc).
 
 
 
Uni01.jpg


 

.

Privacy policy I Warranty I Shipping I Contact us I Copyright © Carbon Fiber Australia