HomeAbout usContact usView Cart


Carbon fiber sheet
Carbon fiber cloth
Carbon fiber tape
Carbon fiber tow
Aramid tow
Carbon fiber tubes
Carbon fiber rods
Carbon fiber strip & bar
Epoxy systems
Epoxy fillers
How to use...

 

 

 

 

 

 

.
.

Credit card, direct debit and PayPal acceptedPaypal, credit card, direct deposit

For phone sales and inquiries please phone: 03 90019093

.

.
   
.



Carbon fiber twill cloth - 1000mm wide x 5m long

Carbon fiber twill cloth - 1000mm wide x 5m long



QTY:

Price:


Price per metre


 

2x2 Twill carbon fiber (CF) provides a great 3D appearance and is more drapable than plain fabric, but also more pliable for molding and shaping complex shapes. Commonly used in car and hobby parts. 2x2 twill weave is a two over two under weave pattern. This cloth is not made in China.

Specifications
Weave
Twill
Warp
3K
Width
1000mm
Length
1m to 110m
Weight
200g/m (7oz)
Thickness
.25mm (.00984")
 
How much epoxy resin will I need?
To completely wet out 1m (1m x 1m) of carbon fiber cloth you will require about 230 to 270g (230-270ml) of mixed epoxy resin. E.g. If you were to make a carbon fiber sheet 1m with a thickness of 1mm to 1.25mm you would use three layers of 200g carbon fiber and a total of 690 to 810g of resin. Please note this is only a rough guide and the volume of resin used is totally dependant on the techniques used (vacuum bagging, wet lay-up, press set, etc).
 
What will I receive and how will it be packaged?
You will receive a perfect piece of the above carbon fiber cloth in your specified quantity/length X 1000mm width on a cardboard roll inside a protective tube. We never fold our CF cloth. All orders are sent via your specified Australia Post service. 

Twill2x2-01.jpg

Twill2x2-04.jpg

Twill2x2-06.jpg


 

.

Privacy policy I Warranty I Shipping I Contact us I Copyright © Carbon Fiber Australia