Plain carbon fiber (CF) provides that great 3D appearance and is more rigid than twill for structural parts. Plain CF cloth weave is a one over one under weave pattern.
Specifications
Weave
Plain
Warp
3K
Width
1270mm (48")
Length
1m to 100m
Weight
200g/m2 (7oz)
Thickness
.25mm (.00984")
How much epoxy resin will I need?
To completely wet out 1mē (1m x 1m) of carbon fiber cloth you will require about 230 to 270g (230-270ml) of mixed epoxy resin. E.g. If you were to make a carbon fiber sheet 1mē with a thickness of 1mm to 1.25mm you would use three layers of 200g carbon fiber and a total of 690 to 810g of resin. Please note this is only a rough guide and the volume of resin used is totally dependant on the techniques used (vacuum bagging, wet lay-up, press set, etc).
What will I receive and how will it be packaged?
You will receive a perfect piece of the above carbon fiber cloth in your specified quantity/length X 1270mm width on a cardboard roll inside a protective tube. We never fold our CF cloth. All orders are sent via your specified Australia Post service.